PELC-PELC-PT435.12-24.230-8pin Voltage Battery Monitor

Voltage Battery Monitor 

PELC-PT435.12-24.230-8pin

The PT435DC is a direct current (DC) voltage monitor and is used to monitor 12VDC to 24VDC batteries. It works (optionally) in two ways, as a battery charge controller or as a battery protection monitor against full discharge. The PT435DC is a monitor for direct current (DC) voltages ,it can be used with 12VDC, 24VDC batteries respectively.

It works in two different ways selectable by the installer (see wiring). One way makes it work as a battery charge controller and the other way makes it work as a full discharge battery protection monitor. In both cases, two voltage limits are set, an upper limit and a lower limit, so that the watchdog relay in [Mode A] arms when the battery voltage is below the lower limit (battery under charge) and disarms when its voltage is becomes greater than the upper limit (battery fully charged) and in [Mode B] arm when the battery voltage is above the upper limit (battery charged) and disarm when its voltage becomes less than the lower limit (battery discharged ).

The PT435.12-24.230-8pin code refers to a monitor that controls a 12-24VDC battery and is powered by a 230VAC mains voltage.

* Type connector Base - 8 Pin required ,code 525086.

Specifications

• Current : 230VAC
• One switching contact output relay: 10A / 250VAC cat. AC1
• Led indicators: POWER ON and RELAY ON
• Protection : Varistor (from surges and lightning)
• Lamp type connector base, 8p
• Operating temperature -20º to +50º C
• Dimensions: WxHxD: 4.2x8.9x10cm 
• Upper limit setting from: 13/26 to 15/30V
• Lower limit setting from: 9/18 to 13/26V

Package Content

1x PELC-PT435.12-24.230-8pin Voltage Battery Monitor