MPL Power Elektro Battery Charger 12V(1A/3A/6A) & 24V(1A/3A)

MPL Power Elektro Battery Charger

12V(1A/3A/6A) & 24V(1A/3A)

The MW-SC6B is an automatic charger designed for 12V or 24V sealed, maintenance-free, lead-acid batteries (VRLA batteries) type GEL and AGM, as well as automotive "normal" open lead-acid batteries. The maximum charging current is 6A. The charger is automatic, checks the battery voltage, selects the charging voltage and current automatically. A properly charged battery reduces the risk of sulphation of the plates and increases the lifetime of your battery, especially when the battery is left unattended for long periods of time. The charging process is as follows:

• Constant current - charging with constant current until the maximum voltage is reached
• Constant voltage - charging with constant voltage
• Maintenance - When the battery is fully charged, the charger will maintain the battery.

Feautures of the Battery Charger 

• Suitable for 12V and 24V wet lead-acid, gel and AGM batteries
• Battery capacity: 1.2Ah - 180Ah (12V), 1.2Ah-90Ah (24V)
• Protections: Short-circuit / Over-voltage
• Selectable charging current: 1A / 3A / 6A (12V), 1A / 3A (24V)
• LCD display, friendly interface, microprocessor controlled
• Battery condition detection, desulfation mode

Features

General

Producer: MW Power

Product code: MW-SC6B

EAN code: 5902135124062

Dimensions: Length Width Height: 21.84cm 8.95cm 4.95cm

Weight (net) 0.625kg

Entry

Input voltage 220-240V (50Hz)

Input current (max.) 0.75A / 230VAC

Exit

Output voltage (max.) 14.7V 29.4V

Output current 1A / 3A / 6A (selectable) 1A / 3A (selectable)

Output power (max.) 88.2W

Efficiency (typ.) 80%

Security

Overvoltage> 16VDC (12V mode),> 32V (24V mode), disconnection of the output voltage

Short-circuit: Disconnection of the output voltage, information on the display

Working Environment

Working temperature -5 ° C ÷ + 40 ° C

Operating humidity 20-90% (relative humidity, non-condensing)

Storage temperature and humidity -10 ° C ÷ 60 ° C, 10 ÷ 95% (relative humidity, non-condensing)

Standards

Safety standards: EN 60335-2-29: 2004 + A2: 2010; EN 60335-1: 2012 + A11: 2014

EMC standards: EN 55014-1, EN 61000-3-3, EN 55014-2, EN 61000-3-3, EN-61000-3-2

The set contents

1x MPL Power Elektro Battery Charger 12V(1A/3A/6A) & 24V(1A/3A)

1x Manual